Class: McDbHatch ​

import { MxCADUiPrPoint, MxCADUtility, McDbHatch, MxCpp, McDb} from "mxcad"
  //选点填充
   const getPoint = new MxCADUiPrPoint();
   console.log("\n指定填充区域内部一点:");
   let pt = (await getPoint.go()) as McGePoint3d;
   if (!pt) return;

   let hatch:McDbHatch = MxCADUtility.builderHatchFromPoint(pt);
   if (!hatch) {
       console.log("没有找到闭合区域\n")
       return;
   }
   // 清除填充图案效果
   hatch.clearPatternDefinition();
   // 添加图案填充定义
   hatch.addPatternDefinition(45, 1, 1, 1, 0.25, [45, 0.17677695, 0, 0, 0.25, 0.125, -0.0625])
   // 设置填充图案
   hatch.setPattern(McDb.HatchPatternType.kCustomDefined, 'test')
   // 设置填充颜色
   hatch.trueColor = new McCmColor(0, 133, 122)
   // 绘制填充对象
   MxCpp.getCurrentMxCAD().drawEntity(hatch);

import { McDbHatch } from "mxcad";

const hatch = new McDbHatch()

import { McDbEntity, ColorIndexType } from 'mxcad'
 const ent = new McDbEntity();
 ent.colorIndex = ColorIndexType.kByblock;
 console.log(ent.colorIndex)

// 假设ent为有效实例对象
const order = ent.drawOrder();

import { MxCpp, MxCADSelectionSet } from "mxcad";

let ss = new MxCADSelectionSet();
if (!await ss.userSelect("\n选择对象")) return;
//得到当前图上对象的最大，小最显示顺序.
let minmaxOrder = MxCpp.getCurrentDatabase().currentSpace.getMinMaxDrawOrder();
// 把对象放到最上面。
let lOrder = minmaxOrder.maxDrawOrder + 1;
ss.forEach((id) => {
  let ent = id.getMcDbEntity();
  if (ent) {
    ent.drawOrder = lOrder;
  }
})

import { McDbEntity } from 'mxcad'
 const ent = new McDbEntity();
 ent.layer = "newLayerName";
 console.log(ent.layer)

// 假设ent为有效实例对象
const layerId = ent.layerId;

// 假设ent为有效实例对象
const mxcad = MxCpp.getCurrentMxCAD();
const layerId = mxcad.addLayer("测试图层")
ent.layerId = layerId;

import { McDbEntity } from 'mxcad'
const ent = new McDbEntity()
ent.linetype = "MyLineType";
console.log(ent.linetype)

// 假设ent为有效实例对象
const linetypeId = ent.linetypeId;

// 假设ent为有效实例对象
const mxcad = MxCpp.getCurrentMxCAD();
const lineId = mxcad.addLinetypeEx("TestMyLine", '25,-5');
ent.linetypeId = lineId;

import { McDbEntity } from 'mxcad'
const ent = new McDbEntity()
ent.linetypeScale = 0.8;
console.log(ent.linetypeScale)

import { McDbEntity } from 'mxcad'
const ent = new McDbEntity()
ent.lineweight = 20;
console.log(ent.lineweight)

// hatch 为图案填充实例对象
const num = hatch.numLoops

// hatch 为图案填充实例对象
const num = hatch.numPatternDefinitions;

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
console.log(obj.objectName);

// hatch 为图案填充实例对象
const angle = hatch.patternAngle

import { McDbHatch } from "mxcad";

const hatch = new McDbHatch();
hatch.patternAngle(Math.PI/4);

// hatch 为图案填充实例对象
const isDouble = hatch.patternDouble;
if(isDouble){
  //填充图案为双倍
}else{
  //填充图案不为双倍
}

import { McDbHatch } from "mxcad";

const hatch = new McDbHatch();
hatch.patternDouble = true;

// hatch 为图案填充实例对象
const scale = hatch.patternScale

import { McDbHatch } from "mxcad";

const hatch = new McDbHatch();
hatch.patternScale = 0.8;

// hatch 为图案填充实例对象
const patternSpace = hatch.patternSpace

import { McDbHatch } from "mxcad";

const hatch = new McDbHatch();
hatch.patternSpace = 0.8;

import { McDbEntity } from 'mxcad'
const ent = new McDbEntity()
ent.textStyle = "st_style";

// 假设ent为有效实例对象
const textStyleId = ent.textStyleId;

// 假设ent为有效实例对象
const mxcad = MxCpp.getCurrentMxCAD();
const textStyleId = mxcad.addTextStyle("MyLineTypeTextStyle", "txt.shx", "hztxt.shx", 1);
ent.textStyleId = textStyleId;

import { McDbEntity, McCmColor} from 'mxcad'
 const ent = new McDbEntity();
 ent.trueColor = new McCmColor(255, 0, 0);
 console.log(ent.trueColor)

import { McDbEntity } from 'mxcad'
const ent = new McDbEntity()
ent.visible = true;
console.log(ent.visible)

import { McDbLine, McDb } from 'mxcad'
const line1 = new McDbLine(new McGePoint3d(0,0,0), new McGePoint3d(20,1,0));
const line2 = new McDbLine(new McGePoint3d(10,10,0), new McGePoint3d(11,1,0));
const ptArr = line1.IntersectWith(line2, McDb.Intersect.kExtendBoth)

import { McDbHatch } from "mxcad"
const hatch = new McDbHatch()
const res = hatch.addPatternDefinition(45, 0, 0, 0, 0.25, [45, 0.17677695, 0, 0, 0.25, 0.125, -0.0625]);
if(res){
  //添加成功
}else{
  //添加失败
}

import { McDbHatch } from "mxcad";
const hatch = new McDbHatch();
const res = hatch.appendCircleLoop(0,0,0,20);
if(res){
   //追加成功
}else{
   //追加失败
}

import { McDbHatch, McGePoint3d, McGePoint3dArray } from "mxcad";

  let solid = new McDbHatch();
  const pts = [
  new McGePoint3d({ x: 10, y: 20, z: 0 }),
  new McGePoint3d({ x: 0, y: 0, z: 0 }),
  ];
  const res = solid.appendLoop(new McGePoint3dArray(pts));
  if(res){
     //设置成功
  }else{
     //设置失败
  }

//假设obj为一个数据库对象
obj.assertObjectModification()

// hatch 为图案填充实例对象
const res = hatch.clearPatternDefinition();
if(res){
  //清空成功
}else{
  //清空失败
}

//假设obj为一个数据库对象
const obj_clone = obj.clone();

//假设obj为一个数据库对象
const res = obj.createExtensionDictionary();

import { MxCADUiPrEntity, McDbEntity } from "mxcad";

let selEntity = new MxCADUiPrEntity();
selEntity.setMessage("选择对象");
let id = await selEntity.go();
if (!id.isValid()) return;
let ent:McDbEntity = id.getMcDbEntity();
if (ent === null) return;
const res = ent.deleteXData("DataName");
if(res){
  //删除成功
}else
  //删除失败
}

import { McDbLine } from 'mxcad'
const line1 = new McDbLine(new McGePoint3d(0,0,0), new McGePoint3d(20,1,0));
line1.disableDisplay(true)

//假设obj为一个数据库对象
const res = obj.erase();
console.log(res);

import { McDbHatch } from "mxcad";

const Hatch hatch = new Hatch();

// 在这里进行填充操作...

// 评估填充结果
const hatchSuccess = HatchEvaluator.EvaluateHatch(hatch);
if (hatchSuccess){
       console.log("\n填充成功！");
   }else{
       console.log("\n填充失败！");
   }

import { McDbEntity, MxCADResbuf } from "mxcad";
// 获取目标对象
let getEnt = new MxCADUiPrEntity();
getEnt.setMessage("选择打碎对象:");
let id = await getEnt.go();
let ent:McDbEntity = id.getMcDbEntity();
if (ent === null) return;
// 打碎对象
let retExplode: MxCADResbuf = ent.explode();

// 假设ent为有效实例对象
const appNames = ent.getAllAppName();
console.log(appNames);

import { McGePoint3d, McDbCircle } from "mxcad"

const center = new McGePoint3d(0,0,0);
const circle = new McDbCircle(center, 20);
const area = circle.getArea();
console.log("圆面积：", area)

import { McDbText, McGePoint3d } from 'mxcad'
const text = new McDbText();
text.textString = "测试Test";
text.height = 20;
text.position = text.alignmentPoint = new McGePoint3d(0,0,0);
const { minPt, maxPt, ret } = text.getBoundingBox()

//假设obj为一个数据库对象
const data = obj.getDatabase();

//假设obj为一个数据库对象
const id = obj.getDatabaseIndexId();

//假设obj为一个数据库对象
const id = obj.getOwnerID();

//假设obj为一个数据库对象
const ptArr = obj.getGripPoints();

//假设obj为一个数据库对象
const handle = obj.getHandle();

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
let imp = obj.getImp();

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
const json = obj.getJson()

// hatch 为图案填充实例对象
const numLoops = hatch.numLoops;
for (let i = 0; i < numLoops; i++) {
   const loop = hatch.getLoopAt(i);
   console.log(loop)
};

import { McDbObject } from "mxcad";
const id = obj.getObjectID();

//假设obj为一个数据库对象
const id = obj.getOwnerID();

// hatch 为图案填充实例对象
const obj = {};
for (let i = 0; i < obj.numPatternDefinitions; i++) {
obj["patternDefinitions:" + i] = hatch.getPatternDefinitionAt(i);
};

// 假设ent为有效实例对象
const xData = ent.getXData();

// 假设ent为有效实例对象
let data = ent.getxDataDouble("DataName");
if(data.ret){
  console.log(data.val)
}

// 假设ent为有效实例对象
let data = ent.getxDataLong("DataName");
if(data.ret){
  console.log(data.val)
}

// 假设ent为有效实例对象
let data = ent.getxDataString("DataName");
if(data.ret){
  console.log(data.val)
}

// hatch 为图案填充实例对象
const style = hatch.hatchStyle();

import { McDbEntity } from 'mxcad'
const ent = new McDbEntity()
ent.highlight(true);

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
obj.initTempObject()

//假设obj为一个数据库对象
const res = obj.isErased();
console.log(res);

//假设obj为一个数据库对象
const res = obj.isHaveExtensionDictionary();

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
let isKind = obj.isKindOf('SomeObjectType');
console.log(isKind); // 输出: true 或 false

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
console.log(obj.isNull()); // 输出: true 或 false

// hatch 为图案填充实例对象
const res = hatch.isSolid();
if(res){
  //实体填充
}else{
  //非实体填充
}

// hatch 为图案填充实例对象
const looptType = hatch.loopTypeAt(0)

import { McDbEntity, McGePoint3d } from 'mxcad'
const ent = new McDbEntity()
ent.mirror(new McGePoint3d(0,0,0), new McGePoint3d(20,10,0))

import { McDbEntity, McGePoint3d } from 'mxcad'
const ent = new McDbEntity()
ent.move(new McGePoint3d(0,0,0), new McGePoint3d(20,0,0))

//假设obj为一个数据库对象
obj.moveGripPointsAt(1,10,10,10);

// hatch 为图案填充实例对象
const patternName = hatch.patternName()

// hatch 为图案填充实例对象
const type = hatch.patternType()

// hatch 为图案填充实例对象
const res = hatch.removeAllLoop();
if(res){
  //删除成功
}else{
  //删除失败
}

// hatch 为图案填充实例对象
const res = hatch.removeLoopAt(1);
if(res){
  //删除成功
}else{
  //删除失败
}

import { McDbEntity, McGePoint3d } from 'mxcad'
const ent = new McDbEntity()
ent.rotate(new McGePoint3d(0,0,0), Math.PI)

import { McDbEntity, McGePoint3d } from 'mxcad'
const ent = new McDbEntity()
ent.scaleEntity(new McGePoint3d(0,0,0), 0.5)

import { McDbHatch, McDb } from "mxcad"

McDbHatch.setHatchStyle(McDb.HatchStyle.kNormal)

import { McRxObject } from 'mxcad';

let obj = new McRxObject();
const res = obj.setJson('{"key": "value"}');
console.log(res)

import { McDbHatch } from "mxcad";

const hatch = new McDbHatch();
const pts = [
new McGePoint3d({ x: 10, y: 20, z: 0 }),
new McGePoint3d({ x: 0, y: 0, z: 0 }),
];
const isSuccess = hatch.setLoopAt(0, new McGePoint3dArray(pts), [0.4,0.8]);
if (isSuccess) {
  console.log("循环设置成功！");
} else {
  console.log("循环设置失败...");
}

import { McDbHatch, MxCpp } from "mxcad";

  const hatch = new McDbHatch();
  hatch.setPattern(McDb.HatchPatternType.kCustomDefined, 'test')
  let mxcad = MxCpp.getCurrentMxCAD();
  mxcad.drawEntity(hatch);

import { MxCADUiPrEntity, McDbEntity } from "mxcad";

//设置扩展数据
let selEntity = new MxCADUiPrEntity();
selEntity.setMessage("选择对象");
let id = await selEntity.go();
if (!id.isValid()) return;
let ent:McDbEntity = id.getMcDbEntity();
if (ent === null) return;
ent.setxData(new MxCADResbuf([{type:DxfCode.kExDataName,val:"DataName"},{type:DxfCode.kString,val:"yyyyy"}]));

import { MxCADUiPrEntity, McDbEntity } from "mxcad";
let selEntity = new MxCADUiPrEntity();
selEntity.setMessage("选择对象");
let id = await selEntity.go();
if (!id.isValid()) return;
let ent:McDbEntity = id.getMcDbEntity();
if (ent === null) return;
const res = ent.setxDataDouble("DataName", 0);
if(res){
  //设置成功
}else{
  //设置失败
}

import { MxCADUiPrEntity, McDbEntity } from "mxcad";

let selEntity = new MxCADUiPrEntity();
selEntity.setMessage("选择对象");
let id = await selEntity.go();
if (!id.isValid()) return;
let ent:McDbEntity = id.getMcDbEntity();
if (ent === null) return;
const res = ent.setxDataLong("DataName", 123456);
if(res){
  //设置成功
}else{
  //设置失败
}

import { MxCADUiPrEntity, McDbEntity } from "mxcad";
let selEntity = new MxCADUiPrEntity();
selEntity.setMessage("选择对象");
let id = await selEntity.go();
if (!id.isValid()) return;
let ent:McDbEntity = id.getMcDbEntity();
if (ent === null) return;
const res = ent.setxDataString("DataName", "xxxxx");
if(res){
  //设置成功
}else{
  //设置失败
}

// 假设ent为有效实例对象
const res = ent.syncData(true);
if(res){
  //同步成功
}else{
  //同步失败
}

import { McGeMatrix3d, McDbEntity, McGeVector3d} from 'mxcad'
 const ent = new McDbEntity()
   let matrix = new McGeMatrix3d();
   matrix.setToTranslation(new McGeVector3d(20,0,0));//平移
   ent.transformBy(matrix);

//假设obj为一个数据库对象
const res = obj.unErase();
console.log(res);

// 假设ent为有效实例对象
ent.updateDisplay()